![[Follow us on Facebook]](/static//images/icons/icon_facebook.png){kind=icon}
![[Follow us on Twitter]](/static//images/icons/icon_twitter.png){kind=icon}
![[Follow us on YouTube]](/static//images/icons/icon_tube.png){kind=icon}
Accepts any bipod which attaches to a standard sling swivel stud.
Ergonomic, DIRECT attach design eliminates all sharp edges which can ensnarl the operators gear
Attach BIPOD-V2 MOUNT-N-SLOT once and leave it on; BIPOD-V2 is the same height as a Picatinny MIL-Spec 1913 Bolt-on Rail Section
BIPOD-V2 MOUNT-N-SLOT - Made by Impact Weapons Components in Colorado:
NEW IMPROVED BIPOD MOUNT-N-SLOT:
WEIGHT REDUCED BY 0.6 OUNCES, TO 1.23 OUNCES TOTAL WEIGHT
HEIGHT REDUCED BY 30%
INCREASED STABILITY AND LOWER PROFILE IMPROVES ACCURACY The higher the bipod is relative to the bore, the more stable the rifle will be on top of it because for the same height off the ground the bipod legs will be wider. Swivel-style bipods should be mounted as "high" as possible so that their swivel axis is as close to the bore axis as possible, which reduces sight/barrel movement for the same amount of rotational correction for leveling.
100% LIFETIME WARRANTY. PERIOD. Return for full refund including your shipping charges
DIRECT attach design eliminates the need for 2 separate mounts; 1- A bipod mount and 2 - A Picatinny MIL-Spec 1913 Bolt-on Rail Section
SPEND LESS MONEY: Compare to $50.00 or more for a Bipod Mount + a Rail Section + Shipping Charges
Accepts any bipod which attaches to a standard sling swivel stud
Ergonomic, DIRECT attach design eliminates all sharp edges which can ensnarl the operators gear
Attach BIPOD-V2 MOUNT-N-SLOT once and leave it on; BIPOD-V2 is the same height as a Picatinny MIL-Spec 1913 Bolt-on Rail Section
47% lower profile than a separate Bipod Mount and Picatinny MIL-Spec 1913 Bolt-on Rail Section
3 or more parts are eliminated from your firearm, based on our competitions mounts used
Micro-Adjustable mounting allows the operator to mount anywhere through any slot or combination of slots on the firearm hand guard
CNC Machined from 303 Stainless Steel and 6061-T6 aluminum; Hard anodized Type III matte finish per MIL-A-8625F
Easily installation and simple to follow instructions, using the Long Arm Hex Key and the 2- 10/32 x 3/8 long Stainless Steel Soc Head Cap Screws and 2- Stainless Steel #10 Washers supplied with each BIPOD-V2 MOUNT-N-SLOT
NO GUNSMITHING - Mounting does not require alteration of firearm hand guard heat shields
MADE IN USA; Including Materials, Tool and Packaging
BIPOD-V2 MOUNT-N-SLOT is MADE BY AMERICANS in COLORADO
![[Python Powered]](/static//images/icons/python-powered.gif){kind=icon}